Local Jobs - WJMC 96.1 FM

Armada Radio Network: Your Next High-Paying Career!

Mike Bigner — Tue, 25 Nov 2025 15:39:31 +0000

Armada Radio Network: Your Next High-Paying Career is ON AIR!

Tired of that “dead-end job” feeling? It’s time to trade in your time card for a career where YOU control your paycheck!

We are the voices you know and trust—96.1 WJMC, STAR 97.7, FOX 99.1, and the whole Armada Radio Network family in Rice Lake!

We are searching for a motivated, high-energy Radio Marketing Consultant to join our supportive, family team!

What’s the best part?

Uncapped Earning Potential: We offer a salary position with the potential to earn $50,000 to $70,000 a year through uncapped commission!
No Experience? No Problem! We provide the best training program to transform you into an expert who helps local businesses achieve their goals.
Rewarding Work: You’ll be a true partner to local businesses, helping them grow their bottom line.

Ready to start building that high-paying, rewarding career? APPLY TODAY!

How to Apply (Strictly Confidential):

Drop Off/Mail Resume: Rice Lake Radio Stations, P.O. Box 352, Rice Lake, Wisconsin 54868.
Call for Info: 715-234-2131

#JobSearch #CareerGoals #SalesJobs #RiceLake #NorthwestWisconsin #RadioMarketing #HiringNow #ArmadaRadio

Equal Opportunity Employer.

The post Armada Radio Network: Your Next High-Paying Career! first appeared on WJMC 96.1 FM.

Estimator – Associate

Mike Bigner — Mon, 22 Sep 2025 19:59:51 +0000

Requisition ID: 94173-0

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

Cost Estimator

Job Purpose: Responsible for the preparation and coordination of Request for Quotations (RFQ’s) for materials components, subassemblies and/or services based on quote requirements received from various departments within the organization (i.e. Engineering, Program Management, and Sales). Will Analyze quotations for content in addition to preparing complete costs analysis. Defines needs, clarifies discrepancies and determines the structure of BOM. Monitor RFQ through all processes and resolve issues that come up. Complete costing information including generation of costed BOM’s, identifying exceptions and assumptions, and identifying and documenting all unique costs and issues. At the highest level, may also be responsible for watching technology trends and preparing cost reduction and other recommendations based on those trends

Nature of Duties:

Responsibilities of the position include but are not limited to:

Calculating material costs
Estimating potential outsourcing of products
Assist in determining the labor costs associated with the product
Monitor, verify and update material costs as time progresses to deliver the product at competitive prices.
Assist and support other plant resources as needed
Work with Engineering staff to insure the correct processes and raw materials meet customer print specifications.
Periodic review of Bills of Material to insure all items are listed and priced accordingly
Research the products and pricing needed to bid the job
Work with Sales and Engineering to make sure there are no communication gaps with requirements needed for quotes
View 3D models to retrieve the necessary data for compiling quotes
Set up quote meetings to gather data from our technical team to compile quotes

Education and Experience:

Computer proficiency with Excel, Word, and some accounting programs
Prior exposure to working with customers
Prior experience in working in a manufacturing environment
Experience with Solidworks or similar CAD Software a plus
Experience with Plastic Injection Molding would be a plus

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

This is an ITAR Facility and applicant must be a US Citizen or a Lawful Permanent Resident.

The post Estimator – Associate first appeared on WJMC 96.1 FM.

Tooling/Project Engineer

Mike Bigner — Mon, 22 Sep 2025 19:58:35 +0000

Requisition ID: 96931-0

Job Purpose:

Develops and procures Plastic Injection tooling for new and existing customer part designs.
Manages the development and implementation process of Sanmina’s products and services, involving departmental and cross-functional teams, focused on the delivery of new or existing products.
Plans and directs resource schedules and budgets.
Manages several projects simultaneously, from initiation, to delivery, and through the end of a product’s lifecycle.
Organizes all interdepartmental activities, ensuring completion of projects on schedule and within budget constraints.

Nature of Duties:

Work closely with customers on part design for manufacturability for Plastic Injection Molding, assuring that Sanmina can process an acceptable product once tool is built. Must understand customer’s specifications and expectations.
Quote new Plastic Injection tooling, coordinate tooling vendor selection and manage selected tool vendor through entire tool build process. Place tooling PO’s accordingly. Develop project plan and provide customer with delivery schedules/timelines, Gantt charts, and other desired information. Maintain on-time delivery of tooling.
Lead internal team and drive timely completion of projects, within quoted budget, by maintaining internal checklists and timelines. Schedule project review meetings to discuss project needs and expectations.
Must coordinate tool design reviews, material selection and procurement, secondary tooling design, tool sampling, FAIR’s, PPAP’s and part approvals.
Provide Document Control with all pertinent new product information for initial set-up of parts in system.
Responsible for creating NPI’s, initiating ECO’s, and assuring that the process is running to quote.
Quote and manage tooling revisions and tool repairs.
Responsible for the timeline of projects and must assure that all other departments and vendors are on schedule.
Engineering liaison between our plant and the customer throughout entire life cycle of a product.
Limited travel as necessary to support customer. International travel is possible. Other duties as required.

Education and Experience:

B.S. degree in Engineering field with 2-5 years of Tooling/Project Engineering experience or 5+ years experience as a Tooling Engineer; preferably Plastic Injection Molding experience.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

The post Tooling/Project Engineer first appeared on WJMC 96.1 FM.

Sr. NPI Process Engineer

Mike Bigner — Mon, 22 Sep 2025 19:57:24 +0000

Requisition ID: 98663-0

Sanmina Turtle Lake, Wisconsin is a full-service plastic injection molding, electronics integration and design service facility. They have 50 injection molding machines and expertise with engineering-grade resins. Sanmina Turtle Lake has long standing business partnerships with both tool designers and manufacturers.

PURPOSE:

The Senior Process Engineers (Plastics) primary focus will be new business and capacity expansion projects. In this position, you will research, model, and develop plastic process technologies, tool designs and processes for new and transfer Thermoset and Thermoplastic injection and compression molding applications projects. The candidate will be responsible for leading a team of Process Engineering Technicians in the execution of design reviews, process development and manufacturing introduction.

DUTIES / RESPONSIBILITIES:

Responsibility for the technology, process development and troubleshooting of thermoset and thermoplastic injection and compression molding processes
Coordinate design for manufacturability (DFM) methodologies into our design reviews
Investigate and recommend new technologies while staying current on manufacturing methods and tool designs

ESSENTIAL FUNCTIONS:

Manage multiple process development projects with minimal supervision
Manage start-up, debug, and commission of new and transfer molding processes
Plan and conduct experimental trials utilizing designed experiments to produce capable and stable molding processes
Apply statistical methods to estimate future manufacturing requirements and potential
Communicate and solve problems
Generate and update technical documents, reports, specifications and BOMs
Lead process development risk analysis (FMEA)
Coordinate and support pre-production build activities
Monitor NPI implemented processes for efficacy utilizing KPI’s
Provide technical support to all facets of our facility
Recognize, document and define qualification requirements for improvements
Develop a flexible process engineering team that supports our critical deadlines
Train and provide direction to process engineering technicians and train manufacturing technicians as part of a qualification
Lead daily NPI sample activities

KNOWLEDGE, SKILLS, AND ABILITIES:

Knowledge of thermoset and thermoplastic resin systems, related processes and tooling is highly desired
Knowledge to innovate, design, and develop processes, procedures, tooling and automation
Sound understanding of injection molding machinery, auxiliary equipment and tooling
Ability to create, foster, and work in a team-oriented environment
Skilled at Root Cause Analysis and Problem Solving
Self-starter motivated to implement positive change to our NPI and manufacturing processes

Ability to provide input and alternatives during part design reviews that improve manufacturability

Other Experiences that we value:

Programming/troubleshooting experience with automation controls such as PLC’s, HMI’s, Servo’s, and vision inspection systems
3D design software (Solid Works) skills and experience
Project Management skills and experience
Lean Manufacturing skills and experience

EXPERIENCE:

Prefer five to seven years of experience with hands-on injection and compression molding of thermoset and thermoplastic materials
Experience working as a member of an NPI customer focused team
Experience developing manufacturing processes (qualification or validation) and their associated documentation
Six Sigma Certification preferred, working knowledge of the DMAIC process is a plus

EDUCATION:

Bachelor’s Degree in Engineering Required (Plastics, Industrial, Manufacturing, Mechanical). Exceptional experience will be considered.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

The post Sr. NPI Process Engineer first appeared on WJMC 96.1 FM.

New Project Coordinator

Mike Bigner — Mon, 22 Sep 2025 19:55:56 +0000

Requisition ID: 98796-0

Job Purpose:

The Engineering Assistant will be responsible for assisting and supporting the Project Engineering team with a variety of initiatives and duties, including but not limited to those listed below. This position will report to the Engineering Manager.

Nature of Duties:

· Assist Project Engineer with all stages of new product introduction and ensure a seamless hand off to production.

· Develop and maintain action trackers for customers and facilitate customer calls.

· Support internal team and help drive timely completion of projects, within quoted budget, by maintaining internal checklists and timelines. Assist in scheduling project review meetings to discuss project needs and expectations.

· Assist with coordinating tool design reviews, material selection and procurement, secondary tooling design, tool sampling, first article inspections, and production part approvals/PPAPs.

· Provide Document Control with all pertinent new product information for initial set-up of buy & make items in system.

· Assist Project Engineer in creating new item documentation, initiating change orders, and assuring that process is running to quoted times.

· Manage NPI checklists by assigning responsible parties their tasks to complete.

· Ensure timeline of projects and assure that all other departments and vendors are on schedule and have current data.

· Other duties and tasks as assigned.

Education and Experience:

Prefer 2 year technical or 4 year degree in business related study and 2+ years experience in related field.
Demonstrates strong work ethic.
Strong written and interpersonal communication skills.
Good time management and organizational skills.
Ability to maintain discretion and confidentiality.
Ability to be a self-starter.
Strong computer skills in using programs such as Excel and PowerPoint

The post New Project Coordinator first appeared on WJMC 96.1 FM.

2nd Shift – Quality Technician

Mike Bigner — Mon, 22 Sep 2025 19:53:58 +0000

Requisition ID: 98946-0

————————————————————————————————————————
Quality Technician

Job Purpose

The purpose of this position is to conduct quality assurance testing and document the results per customer requirements.

Nature of Duties/Responsibilities

1. Set up test equipment according to the documented procedure. Test equipment will contain instruments and test fixtures at a minimum. Will set up and manage instrument test parameters.

2. Test parts according to the documented instructions. Testing conducted will include break tests, tensile tests and so forth. Export data from the test equipment into a database and maintain all testing records.

3. Perform any required dimensional, functional, performance and visual inspections during completion of Production Part Approval Process.

4. Know, understand, and follow pertinent company/plant procedures, rules, and policies. Attend trainings, as required.

Secondary Responsibilities:

1. Keep work area/equipment clean and orderly.

2. Communicate effectively with personnel from all departments, vendors, and customers as necessary.

3. Maintain organized records, logs, and samples.

Education and Experience
1. HS Diploma or Equivalent; 2 year Technical Degree in Quality or related field desired

2. Experienced with the use of force gages, test fixtures and inspection equipment (such as: calipers, micrometers, etc.).

3. Capable of interpreting engineering drawings and CAD models.

4. Strong computer skills with MS Office / Google suite experience.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

The post 2nd Shift – Quality Technician first appeared on WJMC 96.1 FM.

Manufacturing Engineer

Mike Bigner — Mon, 22 Sep 2025 19:51:41 +0000

Requisition ID: 100930-0

Manufacturing Engineer

Job Purpose

Plans, develops, implements and maintains manufacturing methods, processes and operations for new and existing products. The Manufacturing Engineer monitors processes and methods to evaluate material, equipment, and personnel effectiveness in producing quality products at minimum costs. This position also acts as liaison with engineering in releasing new products to the production floor and develops systems to maintain reports and record keeping of company assets.

Nature of Duties/Responsibilities

Interfaces with project engineers on tool design and potential needs for fixtures or methods required to bring the manufacturing process to production
Estimates manufacturing cost, determines time standards and makes recommendations for tooling and process requirements of new or existing product lines
Maintains records and reporting systems for measurement and improvement of the manufacturing operation. (ie. process work instructions, data collection systems etc….)
Directly supports production
Develop, implement and document standard work to support the ergonomic activities within the plant
Provide timely and accurate reporting on project activities
Lead or actively participate in cross-functional teams to ensure New Product Introduction projects are completed in a timely and efficient manner
Lead and/or support improvement initiatives within the facility
Ensure all process development documents are completed in accordance with the Quality Management system to support a smooth transition to production
Validate equipment
Troubleshooting processes and equipment
Ability to travel on short notice
Other duties as assigned

Education and Experience:

Bachelor’s Degree, engineering preferred
Influencing skills and flexible work ethic is important
Problem solving skills such as Lean or Six Sigma preferred
Able to work within deadlines and without direct supervision

This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

The post Manufacturing Engineer first appeared on WJMC 96.1 FM.

Rotating Shift- Molding Operator

Mike Bigner — Mon, 22 Sep 2025 19:50:03 +0000

Requisition ID: 101957-0

Rotating 2/2/3, 7a – 7p Molding Operator

Job Purpose:

The Molding Operator is responsible for removing injection molded plastic parts from molding machines. The operator then does work on those parts following various written and verbal instructions.

Nature of Duties:

Remove the molded plastic parts from injection molding machines.
Trim part from runner using a gate trimming side cutter.
Trim flash from part if needed.
Clean parts as needed.
Visually and mechanically inspect part using written and verbal instructions
Do further operations on the parts as needed. This may be fixture ing, assembly, machining to size, staging parts in a cooling rack, sanding, sonic welding, hot stamping, weigh count, etc.
Pack parts in containers following written or verbal instructions.
Stack full containers in a designated area.
Place runners and reject parts in material grinder, then begin the grinding operation.
Sort runners from parts on automatic running presses.
Record rejects parts at the molding machine.
Complete data entry process, such as listing good parts, scrap parts and time for each job.

Education and Experience:

Prefer high school (or equivalent) education.

Previous operator/assembly experience. 0-1 years

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

The post Rotating Shift- Molding Operator first appeared on WJMC 96.1 FM.

Rotating Shift, Material Handler

Mike Bigner — Mon, 22 Sep 2025 19:48:33 +0000

Requisition ID: 101937-0

12-hour Rotating Schedule – Resin Material Handler

Job Purpose:

The Resin Handler is responsible for mixing and supplying material to all molding machines. Information on handling material is from various written and verbal instructions.

Nature of Duties:

Locate material and equipment needed for each job.
Remove material and equipment from completed jobs.
Issue and return material as instructed.
Supply material to all jobs as assigned.
Unload incoming material and store in proper place in warehouse.
Obtain cycle counts.
Practice safe working habits.
Periodically check for unsafe conditions and correct as needed.
Additional duties as assigned.
Basic computer skills needed.

Education and Experience:

Must have basic computer skills
Previous forklift experience
Previous material handling experience
High School Diploma or equivalent

EEO Employer Vets/Disabled

The post Rotating Shift, Material Handler first appeared on WJMC 96.1 FM.

Tool and Die Maker

Mike Bigner — Mon, 22 Sep 2025 19:47:09 +0000

Requisition ID: 101979-0

Tool & Die Maker

Job Purpose:

Performs skilled tasks using a variety of tools to modify, maintain, and repair injection molding tools, dies, jigs and fixtures. Works with engineers and tool designers to develop and modify tools. Works from blueprints, databases, specifications, and diagrams. Checks work with precision instruments.

Nature of Duties:

· Must be able to make intelligent decisions for any mold repair problems that arise when supervisory people are not available.

· Must have the ability to work with extreme accuracy on any type of tool work.

· Set-up and operate all machine tools and equipment, use various hand tools and precision measuring instruments common to the trade.

· Heat treat small tool and die parts, make special cutters and mills, dress grinding wheels as needed.

· Weld with TIG equipment, repair and replace parts in hydraulic equipment.

· Install/maintain electrical items (heaters and sensors) on plastic injection mold tooling

· Make ejector pins, core pins, make gate changes, K.O. bars, clean and polish mold cavities.

· Basic computer skills needed.

· Other related duties as assigned.

Education and Experience:

Prefer 2 year degree in Machine Tool with 2-4 years of tooling experience in a manufacturing environment.

Experience in Tool & Die building or repairs a plus.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

The post Tool and Die Maker first appeared on WJMC 96.1 FM.